Klarinet Archive - Posting 000241.txt from 1999/08

From: "angella hedrick" <angellah@-----.com>
Subj: RE: [kl] Student mouthpieces
Date: Wed, 11 Aug 1999 16:55:38 -0400

whomever is wondering about student mouthpieces- as you've gotton a flood
of advice- the right answer is always whatever works best for the person
and their instrument. good luck.

----Original Message Follows----
From: "Kevin Fay (LCA)" <kevinfay@-----.com>
Subject: RE: [kl] Student mouthpieces
Date: Wed, 11 Aug 1999 10:09:05 -0700
>From klarinet-return-19567-angellah Wed Aug 11 10:11:39 1999
MHotMailB97AF9CA0146D82197B1CFFCA82810360; Wed Aug 11 10:11:39 1999
Mailing-List: contact klarinet-help@-----.org; run by ezmlm
Precedence: bulk
List-Unsubscribe:
<mailto:klarinet-unsubscribe-angellah@-----.org>
Delivered-To: mailing list klarinet@-----.org
Message-ID: <2DCBFADAFCBBD21189D400805F6FA1AB06D92B56=RED-MSG-12>

Roger Garrett posted:

<<<Opined?>>>

It's a 10 dollar lawyer word for giving an opinion. One of those verbs
seldom used any more except by people who sell opinions--like 10 dollar
lawyers.

<<<Kevin - what is your opinion regarding markup on plastic mouthpieces
vs.hard rubber? Why do the hard rubber mouthpiece blanks which cost the
maker $17.95 sell for $150+ and the identical blank in plastic, which costs
$12 sells for $25? Just curious what your thoughts are on that.>>>

The cynical answer is that they charge more because they can.

My more reasoned guess is that the hard rubber mouthpieces get much more of
the "artist's touch" tan the plastic ones. I'm pretty sure that Jim
Pyne/Richard Hawkins works on each and every one of the "professional"
mouthpieces that bear their name. While the plastic/student mouthpieces may
be advertised as having been hand-finished, the advertisements don't say
WHOSE hand. Jim Pyne costs more than his minion that does the student
stuff--I would expect to pay for that.

I would also bet that the plastic mouthpieces don't require the level of
finishing that the rubber ones do. My bet is that plastic is more
dimensionally stable as it cools from the molding process--the facing is
likely extremely close (so little hand finishing is needed) or, more likely
(at least for the saxophones), the facing is molded into the plastic w/ no
hand finishing at all. I know from other experience that tolerances for
injection molded plastic can be extremely close--close enough to work with
our standard feeler gauges.

kjf

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org

Get Free Email and Do More On The Web. Visit http://www.msn.com

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org

   
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org