Klarinet Archive - Posting 001003.txt from 1999/04

From: "Jay Webler" <webler@-----.net>
Subj: Re: [kl] Moennig reg. vents and Barrels(INCORRECT)
Date: Thu, 22 Apr 1999 21:17:48 -0400

Can you tell me what the differences are between Moennig & Chadesh barrels.

Jay Webler

> The information regarding Moennig barrels is not correct! The Moennig
>barrel does not have an hour glass bore design but the register tube does.
>The Moennig barrel is made with a three staged reverse cone bore. As Hans
>Moennig's last apprentice, I watched him finish the bore in hundreds of his
>Famous barrels. The technique involved 3 separate reamers. The first step
>was to set the general diameter of the barrel. The second step was to set
>the bottom choke. And the third step was to set the reverse cone. This
>third step was always the most critical as It was based on the players "Set
>up", i.e. mouthpiece, reed and clarinet bore size.
> 757-412-2160, fax 412-2158
>
> E-mail Sfdr@-----.com
>
>
>
>
>
>
>
>-------------------------------------------------------------------------
>Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
>Subscribe to the Digest: klarinet-digest-subscribe@-----.org
>Additional commands: klarinet-help@-----.org
>Other problems: klarinet-owner@-----.org
>
>

-------------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org

   
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org