Klarinet Archive - Posting 001370.txt from 1999/01

From: Richard Bush <rbushidioglot@-----.net>
Subj: Re: [kl] Question about pads
Date: Wed, 27 Jan 1999 20:41:37 -0500

GrabnerWG@-----.com wrote:
>
> In a message dated 1/26/99 9:32:17 PM Central Standard Time,
> ryebass@-----.com writes:
>
> << From: ryebass@-----.com (Ryan Bassette)
> Reply-to: klarinet@-----.org
> To: klarinet@-----.org
>
> Dear list,
>
> The paper/plastic coating on my register key pad is starting to peel
> off......
>
> OR, how difficult is it to find a simple replacement pad via a local music
> store...is this something that is fairly standardized and they might have
> in stock or would that route involve a long arduous process?
>
> >>
>
> Ryan....you must have the pad replaced. There is no "repair" for a pad,
> especially as bad off as this one is.
>
> Find a local repairman....he/she can fix this in a minute and also check for
> other pads that might be going bad. Chances are that others will need
> replacement too. Be prepared for that.
>
> Some music stores carry limited repair supplies, most do not.You can order
> pads etc. from WW&BW in a variety of kits, or order directly from a supplier.
> The one I like most is Valentino. They are very accommodating and have
> EXCELLENT products.
>
> Their number is 1-800-886-PADS.
>
> Remember that replacing pads is a much more involved task than just gluing one
> in. If you need more info on pad replacement research Sneezy.
>
> Good Luck
>
> -------------------------------------------------------------------------
> Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
> Subscribe to the Digest: klarinet-digest-subscribe@-----.org
> Additional commands: klarinet-help@-----.org
> Other problems: klarinet-owner@-----.org

The register key pad tends to break down more quickly than others
because of the relatively sharp edges of the metal tube. Most high grade
or artist grade instruments use cork pads for the register key. You
should seriously consider having the pad replaced with a cork one. Once
done, it will last longer than any other pad on the clarinet.

Also, the amount of opening of the register key is critical to the
tuning and response of the second and third registers. The register key
should open less than the thickness of a dime, more like 25 to 29
"thousandths" of an inch. A highly qualified repairman will be able to
dial in an optimal setting for this elevation. Because of what I just
mentioned, I would strongly suggest that you not do this work yourself.
The work, however, does not take a great deal of time to do and you
should be in and out of the store in no time.

-------------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org